Ford Frozen White 7VTA: Paint Code & Touch Up Paint Guide

Ford Frozen White is one of Ford's best-known solid white finishes and is commonly associated with paint code 7VTA. It has appeared across a wide range of Ford cars and vans, so it is a frequent colour for stone-chip, scratch and bumper repairs.

If you are repairing Frozen White, do not choose paint by eye alone. Confirm the code on the vehicle or through the correct vehicle information before ordering.

What is the Ford Frozen White paint code?

7VTA is a widely used Ford code for Frozen White. Depending on the vehicle, supplier system and model year, the same colour family can also appear under other reference codes. Your own vehicle label is the best reference to use.

Is Ford Frozen White metallic?

No. Frozen White is a solid/non-metallic white, which generally makes it simpler to touch in than metallic or pearl whites. However, the surrounding paint can still vary in appearance because of age, polishing, previous repairs and weathering.

Which Ford models use Frozen White?

Frozen White has been used across numerous Ford models including Fiesta, Focus, C-Max, S-Max, Galaxy, Transit, Tourneo, Ranger, EcoSport and Puma. Availability varies by year and market, so always confirm your own vehicle rather than assuming from the model.

How to confirm Frozen White on your car

1. Check the vehicle paint label for the paint code.
2. Use your registration to identify the correct vehicle details.
3. Confirm that the colour information corresponds with Frozen White / 7VTA.
4. Check whether the panel has been repainted previously.

You can start with our car paint finder by registration or read the full paint code by registration guide.

Best touch up product for Ford Frozen White

For small stone chips and pin-point damage, a touch-up pen gives the most control. A brush bottle suits slightly larger chips and scratches, while an aerosol is more appropriate for broader scuffs and localised panel repairs.

For a full comparison, see our car touch up paint guide.

Do I need primer?

If the chip has exposed bare metal or another substrate that requires priming, use the correct primer before colour. If the original primer is still intact, primer may not be necessary for a very small touch-in.

Do I need lacquer?

That depends on the specific paint system supplied. Follow the instructions for the paint product you are using rather than assuming every white repair is a single-stage system.

Why can Frozen White look different after application?

Freshly applied paint can look slightly different while wet or if applied too heavily. Ageing of the surrounding finish, previous repairs and lighting can also affect the apparent shade. Build colour with controlled coats and judge it only after it has dried properly.

Ford Frozen White FAQs

Is 7VTA definitely Frozen White?

7VTA is widely associated with Ford Frozen White, but you should still verify the code on your own vehicle before ordering.

Is Frozen White a pearl colour?

No. It is generally treated as a solid white rather than a pearl or three-stage finish.

Can I repair Frozen White stone chips myself?

Yes. Small chips are a good use case for a touch-up pen or bottle when the area is cleaned, prepared and built in thin layers.

Find Ford Frozen White touch up paint

Start with your registration or paint code, confirm the exact vehicle colour and then choose the applicator that suits the repair size.

Browse Ford touch up paint or find your car paint by registration.